VIDEO
The Range Rover Sport or Full Size Supercharged has the 6 piston Brembo Brakes and a lot of guys get intimidated by that, where it really is not that hard to do.
So what we're going to do is show you how to install the rotors and pads and also the pad wear sensor.
Watch Doug, our Land Rover Master Technician, install the brake rebuild kit on a Range Rover Sport Supercharged 2014 with the Brembo 6-pin calipers.
This process also applies to the Range Rover Full Size L405 Supercharged with Brembo calipers.
Doug will show you how to install front and rear brake pads and rotors including brake wear sensors.
Please refer any questions or comments to 1-800-533-2210 or contact us via the question tab.
Be sure to check out our entire stock of Range Rover Sport brake parts .
Kit #: 8889 Install Brake Rebuild Kit On 2014 Range Rover Sport 5.0L, V8, 8-Cylinder Gasoline, North American SpecificationsHi I'm Doug, your tech support representative here at Atlantic British. In this video we're going to talk about brake replacement on 2014 and newer Range Rover Sport. No in this case we're doing the Supercharged, which has the 6 piston Brembo brakes. A lot of guys get intimidated by that, where it really is not that hard to do. So what we're going to do is show you how to install rotors and pads, and also the pad wear sensor. So if you hang in, we're going to show you exactly how to do it and how easy it is to do. To give you an idea of how simple it is, this is essentially all the tools you're going to need to change the fronts. You need a hammer and a pin to drive out the 2 pins that hold the pads in place. Couple straight blade screw drivers we can use to compress the pistons before we pull the caliper off. You're going to need a number 50 torx driver for the retainer pin for the front rotors and then a 21 millimeter socket for the 2 bolts that hold the caliper on the mount. Now I'm also going to recommend a good strong hook, because once you take that caliper off, while you're doing the rotor change, you don't want to hang that caliper by the brake hose. You can end up causing damage to the brake hose. So a good stiff hook. You can work one end into the caliper, one end the upper control arm, and that will hold it up out of the way until you're done putting the rotor on and you're ready to reinstall the caliper. So, essentially all you have are 2 pins that hold down this anti-rattle bracket right here. And we're going to just drive those 2 pins out. We're going to collapse those pistons before we take the caliper off. That's the best time to do it. And you can do it now, or you can do it after the bracket off. I'm going to remove the bracket first just to give you more visibility with what you're working with. And then we'll carry on from there. So while we're tapping this out, keep in mind that this is spring loaded. This has some tension on it. As you knock this upper pin out, this is going to want to force itself out. So this is why I use a long punch, so I can actually use the punch in place of the pin to hold that and then as I remove the punch, this will come out and I can take the bracket right up and out of the way.It's a little tight but you can get in there. So we're connected, we're routed. And remember we had also popped the wire for the parking brake motor out so we push the grommet back in place so everything's secure. So now it's just a matter of plugging this in. As you can see you basically have like a U shaped connection here. And then there's a cut out in the brake pad, so you just simply line the 2 up. Give this a little wiggle. And you'll feel it seat in. You just give it a light tug back, just to make sure it's locked in place. And there you are. You're good. So essentially we're going to do the same thing to the other side, which will actually be a little easier because you don't have to deal with the pad sensor. So once that's completed, you've got new brakes all the way around on your new Sport. So when you're ready to replace the brakes on your 2014 or newer Sport, just give a call to any of our knowledgeable salesman at 1-800-533-2210. Or if you'd like you can click on this link and order it online. And if you like our how to videos you can go to our YouTube site and subscribe and look at all the various videos that we've all ready done. So when you're ready. Thank you very much for watching. And Rover on.
Applies To These Models:Range Rover Full Size V8 5.0L Supercharged | 13 - OnRange Rover Sport V8 5.0L Supercharged | 14 - On
This video has been viewed: 46,343 times